THERMOCHIP includes THERMOCHIP MH continuous insulation system on its four surfaces in all the of products available.
Unlike any other product,THERMOCHIP® continuous insulation enables a more stable and homogenous roof design by being able to assemble it from all four sides of the panel, therefore, eliminating any thermal bridges. Easy panel installation and continuous insulation is guaranteed.
Roofs with slope
The THERMOCHIP ROOF roofs with slopes panel is made up of a decorative layer with a wide range of finishes for the bearing structure it is in contact with. Continuous insulation of extruded polystyrene, tongue-and-groove joints on all four sides, and a waterproof plank on the outer surface of the framing. A breathable waterproof veneer, which can be adhered after the installation of the roof, is available (THERMOCHIP PLUS). This gives an extra protection against water.
Flat roofs
THERMOCHIP ROOF flat roof panel is made up of a plaster fibreboard which is in contact with the bearing structure, a tongue-and-groove on all four sides continuous insulated core made of extruded polystyrene and a cement fibre plank on the top surface of the roof.
This is a sandwich panel made up of plaster fibreboard, an insulating core of extruded polystyrene and a cement-fibre board made from glass and Portland cement […]
Ver más información
Waterproofing has been added to the advantages of THERMOCHIP thermal insulation and decoration and thus taking it one step further into the complete building integration. THERMOCHIP […]
Ver más información
THERMOCHIP FIR (TAH) is made up of a waterproof fibreboard plank, an insulating extruded polystyrene core and fir finish on the interior side. This panel offers […]
Ver más información
THERMOCHIP FIR (TAH) is made up of a waterproof fibreboard plank, an insulating extruded polystyrene core and fir finish on the side used in the interior. […]
Ver más información
THERMOCHIP FIR PLYWOOD (TAH LT) is made up of a waterproof fibreboard plank, an insulating extruded polystyrene core and fir finish on the side used in […]
Ver más información
DM Finish waterproof veneered in noble woods comes in oak, chestnut and iroko, giving it an aesthetic finish identical to solid wood and also giving dimension […]
Ver más información
MDF Plank is always ready to decorate and paint to any building design.
Ver más información
A high acoustic technical performance and fire-resistant plank. It has an industrial decorative finish since it is very similar to concrete framework.
Ver más información
THERMOCHIP (TFH) is a high performance panel which offers a high level of insulation from the extruded polystyrene core and the excellent qualities of the veneered […]
Ver más información
THERMOCHIP CHIPBOARD PANEL (THH) is the simplest product in the catalogue. It is formed by two waterproof chipboard planks held together by an extruded polystyrene core. […]
Ver más información
THERMOCHIP IROKO (TIRH) was especially designed for roof designs which include the interior of the building. This enables one to enjoy the beauty of a ceiling […]
Ver más información
THERMOCHIP ACOUSTIC (TKH) is made up of compressed wood shavings with magnesite plank. The main quality of this plank is that it is sound-absorbent and it […]
Ver más información
THERMOCHIP TMH is made of a 10mm white melamine veneer DM (medium density) plank made from wood fibres on the inner side, a extruded polystyrene core […]
Ver más información
THERMOCHIP OSB (TOH) is made up of a 12mm OSB3 particleboard plank on the interior and a 19mm waterproof plank on the exterior. THERMOCHIP TOH allows […]
Ver más información
THERMOCHIP GYPSUM PLASTERBOARD (TPLH) is made up of a waterproof fibreboard plank, an extruded polystyrene core (different widths depending on the insulation needed) and a gypsum […]
Ver más información
THERMOCHIP OAK is made up of a waterproof fibreboard plank, an extruded polystyrene core an oak finish on the interior side of the panel. This panel […]
Ver más información
Due to its high density, this plaster fibreboard panel is ideal when a more acoustic insulation is needed. It is also fire-resistant and can be painted.
Ver más información
THERMOCHIP GF FIR (TAH) is made up of a waterproof fibreboard plank, an insulating extruded polystyrene core and fir finish on the side used in the […]
Ver más información
THERMOCHIP FIR PLYWOOD GF (TAH LT GF) is made up of a waterproof fibreboard plank, an insulating extruded polystyrene core and fir finish on the side […]
Ver más información
THERMOCHIP CHIPBOARD PANEL GF (THH) is the simplest product in the catalogue. It is formed by two waterproof chipboard planks held together by an extruded polystyrene […]
Ver más información
THERMOCHIP TAO WF (TAO WF) is made up of an OSB3 plank, a wood fibre and vapour barrier core and a fir finish on its interior […]
Ver más información
THERMOCHIP TAO LT WF (TAO LT) is made up of an OSB3 plank, a wood fibre + vapour barrier core and a fir plywood plank on […]
Ver más información
THERMOCHIP TOO (TOO) is made up of a 12mm OSB3 particleboard plank on the inner and outer side of the panel. THERMOCHIP TOO allows different configurations […]
Ver más información
These planks are ideal to install on already existing slabs thus creating a continuous insulation and covering for the installation of exterior cladding in just one […]
Ver más información
These planks are ideal to install on already existing slabs thus creating a continuous insulation and covering for the installation of exterior cladding in just one […]
Ver más información
These planks are ideal to install on already existing slabs thus creating a continuous insulation and covering for the installation of exterior cladding in just one […]
Ver más información
